Pico-Breadboard-Kit

Pico Breadboard Kit

Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top, a Programmable Buzzer, 4 Programmable LEDs, 4 Push buttons, and dedicated 5V, 3v3, and GND pins at a single place.

Features

Four independent controlled LEDs.

Four independent controlled Push Buttons.

Compatible with Pico.

A 400 points half-size breadboard.

Programmable Buzzer.

Dedicated 5v, 3v3, and Gnd Pins for easy interface.

Specifications

Operating Voltage - 3.3V DC

Communication Interface - GPIO Header

Dimensions: 85mm × 133 mm (Approx.)

Buy it From : Click Here

Pinout

Led's, Buzzer and Switches are not internally connected with any GPIO of Raspberry Pi Pico, One can use any available GPIO pin of Raspberry Pi Pico with the help of jumper wires.

Installation

MicroPython

Connect Raspberry Pi Pico on female header of Pico Breadboard Kit.

Connect USB cable on Raspberry Pi Pico USB port.

Use jumper cables to connect Switches , Led's and Buzzer with Raspberry Pi Pico GPIO headers.

Open Thonny IDE and Choose interpreter as MicroPython (Raspberry Pi pico).

Now use example code "Test.py" from pico breadboard kit's github repository in thonny IDE.

Source code : https://github.com/sbcshop/Raspberry-Pi-Pico-Breadboard-Kit

Copy and paste code in thonny ide.

Choose interpreter as MicroPython (Raspberry Pi pico).

Click on green play button to run example on Pico Breadboard Kit.