View source for Pico-1.14-LCD-HAT

<div class="row">
  <div class="large-8 column">
== Pico 1.14" LCD HAT ==
1.14” LCD HAT for Raspberry Pi Pico is a 1.14-inch display expansion board module of 240×135 resolution, 65K RGB colors, clear and colorful displaying effect, with a joystick, designed dedicatedly for Raspberry Pi Pico to expand its engagement via SPI communication by providing standard 40 pins GPIO interface. The 1.14” LCD HAT for Raspberry Pico comes with an embedded ST7789 Driver and SPI Interface that minimize the required IO pins. It is designed with a 5-input Joystick that will be internally connected to the 1.14” LCD HAT for Raspberry Pi Pico via a stackable GPIO connector header.

=== Features ===
<li> Raspberry Pi Pico compatibility. </li>
<li> 4-wire SPI Communication. </li>
<li> Standard Raspberry Pi Pico 40 Pins GPIO. </li>
<li> 4 directions + attached band Central press button Joystick Control  </li>
</br>

=== Specifications ===
<li> Operating Voltage - 3.3 V </li>
<li> Display Size - 24.91 × 14.86mm </li> 
<li> Pixels - 240×135 resolution </li>
<li> Pixel Size - 0.1101 × 0.1035mm </li>
<li> Display Colour - 65K RGB </li>
<li> Display Driver -  ST7789 </li>

</div>
  <div class="large-4 column">
[[File:PICO_114_LCD.png|thumb|left|alt=Pico 1.14 LCD HAT| Buy it From : ''[https://shop.sb-components.co.uk/products/1-14-lcd-hat-for-pico Click Here]'']]
  </div>
</div>

== Pinout ==
<table class="wikitable">
<tr> <th>PICO LCD HAT </th> <th>PICO Pins </th></tr>

<tr> <td> LCD DIN </td> <td> GP11 </td></tr>
<tr> <td> LCD CLK </td> <td> GP10 </td></tr>
<tr> <td> LCD DC </td> <td> GP8 </td></tr>
<tr> <td>LCD CS</td> <td> GP9 </td></tr>
<tr> <td> LCD RST </td> <td> GP12 </td></tr>
<tr> <td> LCD BL </td> <td> GP13 </td></tr>
<tr> <td> JOYSTICK UP </td> <td> GP18 </td></tr>
<tr> <td> JOYSTICK DOWN </td> <td> GP20 </td></tr>
<tr> <td>JOYSTICK LEFT</td> <td> GP21 </td></tr>
<tr> <td>JOYSTICK RIGHT</td> <td> GP17 </td></tr>
<tr> <td>JOYSTICK SELECT</td> <td> GP19 </td></tr>

</table>

== Installation ==
==== MicroPython ====
<li> Stack Raspberry Pi Pico on female header of Pico 1.14" LCD HAT. </li>
<li> Connect USB cable on Raspberry Pi Pico USB port. </li>
<li> Open Thonny IDE and Choose interpreter as MicroPython (Raspberry Pi pico). </li> <br>
[[File:Thonny-interpreter.PNG|600px]]
<li> Now Create a file "Lcd1_14driver.py" as same content from Pico 1.14" LCD HAT's github repository in any micropython supported ide (preferred thonny ide) and save it in root location of Raspberry Pi Pico with same name "Lcd1_14driver.py" (without quotes). </li> <br>
Source code : https://github.com/sbcshop/PICO-1.14-LCD-HAT <br><br>

[[File:Pico_114_lcd_files.PNG|600px]]

<li> Copy and Paste or Open "Lcd1_14Demo.py" code in thonny ide.</li> <br>
[[File:Pico_11_lcd_thonny.PNG|600px]]
<li> Click on green play button to run example of Pico 3V Relay HAT, You can either save this file on root location of PICO or on your Computer drive. </li> <br>
[[File:Thonny_play.PNG]]
<li> You can use Joystick to change background color of LCD. </li>

== Resources ==