Difference between revisions of "Pico-rfid-expansion"

From SB-Components Wiki
 
(One intermediate revision by the same user not shown)
Line 20: Line 20:
 
</div>
 
</div>
 
   <div class="large-4 column">
 
   <div class="large-4 column">
−
[[File:Pico_RFID_Expansion.png]]
+
[[File:Pico_RFID_Expansion.png|thumb|left|alt=Pico RFID Expansion| Buy it From : ''[https://shop.sb-components.co.uk/products/raspberry-pi-pico-rfid-expansion Click Here]'']]
 
   </div>
 
   </div>
 
</div>
 
</div>
Line 28: Line 28:
 
<tr> <th>PICO RFID Board </th> <th>PICO Pins </th></tr>
 
<tr> <th>PICO RFID Board </th> <th>PICO Pins </th></tr>
  
−
<tr> <td> OLED SDA </td> <td> GP11 </td></tr>
+
<tr> <td> OLED SDA </td> <td> GP20 </td></tr>
−
<tr> <td> OLED SCL </td> <td> GP10 </td></tr>
+
<tr> <td> OLED SCL </td> <td> GP21 </td></tr>
 
<tr> <td> RFID TX </td> <td> GP1 </td></tr>
 
<tr> <td> RFID TX </td> <td> GP1 </td></tr>
 
<tr> <td> BUZZER </td> <td> GP2 </td></tr>
 
<tr> <td> BUZZER </td> <td> GP2 </td></tr>

Latest revision as of 12:05, 23 June 2021

Pico RFID Expansion

Raspberry Pi Pico RFID Expansion is the latest technology in the range of SB Component products boasting an advanced RFID Reader at the frequency of 125KHz with a compact design that has a programmable 0.91” OLED Display and, an updated UART/I2C interface running, that is compatible with Raspberry Pi Pico. It helps the user to read the information of the ID stored on the RFID key fob and tags. Every RFID tag/key fob comes with a unique identity that cannot get copied. There are control jumpers that allow the user to control the OLED, RFID reader, and buzzer pins, other than the default pins.

Features

  • UART/I2C Communication Interface.
  • Supports 125kHz Key Fob/ Tags.
  • Programmable buzzer.
  • I2C/ UART Buzzer selection Jumper.
  • Onboard Programmable 0.91” OLED Display. ​
  • Compatible with Raspberry Pi Pico. ​

    • Specifications

  • Operating Voltage - 5V
  • DRFID Tag Frequency - 125 kHz
  • Communication Interface - UART/I2C
  • Default Baud rate - 9600 bps
    • Pico RFID Expansion
    Buy it From : Click Here

    Pinout

    PICO RFID Board PICO Pins
    OLED SDA GP20
    OLED SCL GP21
    RFID TX GP1
    BUZZER GP2

    Installation

    MicroPython

  • Stack Raspberry Pi Pico on female header of Pico RFID Expansion Board.
  • Connect USB cable on Raspberry Pi Pico USB port.
  • Make sure all jumpers are connected.
  • Open Thonny IDE and Choose interpreter as MicroPython (Raspberry Pi pico).


    • Thonny-interpreter.PNG

  • Now Create three files as "framebuf.py" , "ssd1306.py" and "usdl2.py" from lib folder from Github Repository of RFID Expansion and save these files in root location of Raspberry pi pico by clicking on File >> Save >> Raspberry Pi Pico


    • Source code : https://github.com/sbcshop/Raspberry-Pi-Pico-RFID-Expansion

    Pico RFID EXP thonny.PNG

  • Copy and Paste or Open "Board_test.py" code in thonny ide.


    • Pico RFID EXP thonny2.PNG

  • Click on green play button to run example of Pico RFID Expansion Board, You can either save this file on root location of PICO or on your Computer drive.


    • Thonny play.PNG

  • Now Tap RFID Card/Tag/Keyfob over RFID reader to print TAG ID on Oled Display.

    • Resources

    Retrieved from "https://learn.sb-components.co.uk/index.php?title=Pico-rfid-expansion&oldid=696"