Difference between revisions of "Pico-RTC-Hat"

Latest revision as of 06:48, 11 June 2021

Pico RTC HAT

Pico RTC HAT is a Real-Time clock expansion module with the powerful IC DS3231, backup battery holder, operating voltage 3.3 V, and Fast (400kHz) I2C Interface that measures the time which aligns the time of the device with the “Real-Time”. It is developed with the standard Raspberry Pi Pico header that supports the Raspberry Pi Pico series to enhance its efficiency at a low cost.

Features

Accuracy ±2ppm from 0°C to +40°C.

Accuracy ±3.5ppm from -40°C to +85°C.

Battery Backup Input for Continuous Timekeeping.

Operating Temperature Ranges Commercial: 0°C to +70°C Industrial: -40°C to +85°C.

Real-Time Clock Counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap Year Compensation Valid Up to 2100.

Programmable Square-Wave Output.

Digital Temp Sensor Output: ±3°C Accuracy.

Specifications

Operating Voltage - 3.3 V

Inbuilt IC - DS3231

Battery - CR1220 coin cell

I2C Interface - 400 Khz

Backup Battery Voltage - 2.3V~5.5V

Buy it From : Click Here

Pinout

PICO RTC HAT	PICO Pins
VCC	3V3
GND	GND
RTC SDA	GP6
RTC SCL	GP7

Installation

MicroPython

Stack Raspberry Pi Pico on female header of Pico RTC HAT..

Connect USB cable on Raspberry Pi Pico USB port.

Choose interpreter as MicroPython (Raspberry Pi pico).

Now use example code "RTC-HAT.py" from Pico RTC HAT's github repository in thonny ide.

Source code : https://github.com/sbcshop/Pico-RTC-HAT

Copy and paste or open code in thonny ide.

Click on green play button to run example of Pico RTC HAT.

To change date, time or week, change variables of below line:

CurrentTime = b'\x00\x00\x01\x06\x16\x04\x21' #00:00:01 friday 16/04/2021

@@ Line 28: / Line 28: @@
 == Pinout ==
-[[File:Pico_RTC_Pinout.png]]
+<table class="wikitable">
+<tr><td>[[File:Pico_RTC_Pinout.png]]</td>
+<td>
+<table class="wikitable">
+<tr> <th>PICO RTC HAT </th> <th> PICO Pins </th></tr>
+<tr> <td> VCC </td> <td> 3V3 </td></tr>
+<tr> <td> GND </td> <td> GND </td></tr>
+<tr> <td> RTC SDA </td> <td> GP6 </td></tr>
+<tr> <td> RTC SCL </td> <td> GP7 </td></tr>
+</table>
+</td>
+</table>
 == Installation ==
@@ Line 43: / Line 54: @@
 [[File:Thonny_play.PNG]]
 <li> To change date, time or week, change variables of below line:  </li>
+<syntaxhighlight inline>
 CurrentTime = b'\x00\x00\x01\x06\x16\x04\x21' #00:00:01 friday 16/04/2021
+</syntaxhighlight>
 == Resources ==