Difference between revisions of "Differential-pressure-breakout"
From SB-Components Wiki
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<div class="row"> | <div class="row"> | ||
<div class="large-8 column"> | <div class="large-8 column"> | ||
| − | == | + | == Differential Pressure Breakout == |
Differential Pressure Breakout comprises NXP's MPXV5010DP, is an Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated, and Calibrated. Differential Pressure Breakout consists of two axial ports to accommodate industrial grade tubing. In the temperature range between 0º and 85ºC, the maximum error rate of the sensor is 5.0%. | Differential Pressure Breakout comprises NXP's MPXV5010DP, is an Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated, and Calibrated. Differential Pressure Breakout consists of two axial ports to accommodate industrial grade tubing. In the temperature range between 0º and 85ºC, the maximum error rate of the sensor is 5.0%. | ||
| Line 11: | Line 11: | ||
=== Specifications === | === Specifications === | ||
| + | * Operating Voltage : 5V | ||
* Operating Pressure - 1.45 psi | * Operating Pressure - 1.45 psi | ||
* Port Type - Dual Radial Barbed | * Port Type - Dual Radial Barbed | ||
| Line 19: | Line 20: | ||
</div> | </div> | ||
<div class="large-4 column"> | <div class="large-4 column"> | ||
| − | [[File: | + | [[File:Diff_pressure_brkout.png|thumb|left|alt=Diff pressure breakout| Buy it From : ''[https://shop.sb-components.co.uk/products/differential-pressure-sensor Click Here]'']] |
</div> | </div> | ||
</div> | </div> | ||
| Line 39: | Line 40: | ||
==== Arduino ==== | ==== Arduino ==== | ||
| + | * Connect differential sensor breakout with Arduino uno as shown below : | ||
| + | <table> | ||
| + | <tr><td> | ||
| + | <img src="https://raw.githubusercontent.com/sbcshop/Differential-Pressure-Sensor-Breakout/main/images/diff_pressure_arduino.png" width="500" align="left" height="500 /> </td> | ||
| + | <td> | ||
| + | <table class="wikitable"> | ||
| + | <tr> <th> Pinout </th> <th> Arduino </th></tr> | ||
| + | <tr> <td> VCC </td> <td> 5V </td></tr> | ||
| + | <tr> <td> CS </td> <td> Digital Pin 8 </td></tr> | ||
| + | <tr> <td> SCK </td> <td> Digital Pin 13 </td></tr> | ||
| + | <tr> <td> MISO </td> <td> Digital Pin 12 </td></tr> | ||
| + | <tr> <td> VOUT </td> <td> A0 (In case you are using Analog interface) </td></tr> | ||
| + | <tr> <td> GND </td> <td> Ground pin </td></tr> | ||
| + | </table> </td> </tr> </table> | ||
| + | |||
| + | * Now visit the below link for Arduino source code. | ||
| + | https://github.com/sbcshop/Differential-Pressure-Sensor-Breakout/blob/main/Arduino/diff_pressure/diff_pressure.ino | ||
==== Raspberry Pi ==== | ==== Raspberry Pi ==== | ||
| + | Connect differential sensor breakout with Raspberry Pi as shown below : | ||
| + | <table><tr><td> | ||
| + | <img src="https://raw.githubusercontent.com/sbcshop/Differential-Pressure-Sensor-Breakout/main/images/diff_pressure_raspberry.png" width="500" height="500 /> </td> | ||
| + | <td> | ||
| + | <table class="wikitable"> | ||
| + | <tr> <th> Pinout </th> <th> Raspberry Pi (BCM) </th></tr> | ||
| + | |||
| + | <tr> <td> VCC </td> <td> 5V </td></tr> | ||
| + | <tr> <td> CS </td> <td> GPIO 8 </td></tr> | ||
| + | <tr> <td> SCK </td> <td> GPIO 11 </td></tr> | ||
| + | <tr> <td> MISO </td> <td> GPIO 9 </td></tr> | ||
| + | <tr> <td> VOUT </td> <td> Not Connected </td></tr> | ||
| + | <tr> <td> GND </td> <td> Ground pin </td></tr> | ||
| + | </table> </td> </tr> </table> | ||
| + | </td> </tr> </table> | ||
| + | |||
| + | * Now visit the below link for Raspberry Pi source code. | ||
| + | |||
| + | https://github.com/sbcshop/Differential-Pressure-Sensor-Breakout/blob/main/Python/diff_pressure.py | ||
== Resources == | == Resources == | ||
| + | ''' Github ''' | ||
| + | * [https://github.com/sbcshop/Differential-Pressure-Sensor-Breakout Source Code] | ||
| + | |||
| + | ''' Datasheet ''' | ||
| + | * [https://download.mikroe.com/documents/datasheets/mpxv5010dp.pdf MPXV5010 Datasheet] | ||
| + | * [https://ww1.microchip.com/downloads/en/DeviceDoc/20001950F.pdf MCP3551 Datasheet] | ||
Latest revision as of 06:30, 25 June 2021
Differential Pressure Breakout
Differential Pressure Breakout comprises NXP's MPXV5010DP, is an Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated, and Calibrated. Differential Pressure Breakout consists of two axial ports to accommodate industrial grade tubing. In the temperature range between 0º and 85ºC, the maximum error rate of the sensor is 5.0%.
Features
- MPXV5010DP has an analog output
- Temperature Compensated over -40 to +125C
- The signal passes through the onboard 22-bit ADC before being outputted through the SPI interface
- Durable Epoxy Unibody and Thermoplastic (PPS) Surface Mount Package.
Specifications
- Operating Voltage : 5V
- Operating Pressure - 1.45 psi
- Port Type - Dual Radial Barbed
- Port Size - 4.93 mm
- Interface- SPI / Analog Interface
- Measurement range- 0 to 10 kPa
Buy it From : Click Here
Pinout
| Pinout | Description |
|---|---|
| VCC | Positive Supply Voltage pin (5V) |
| CS | Chip Select Digital Input pin |
| SCK | Serial Clock Digital Input pin |
| MISO | Data/Ready Digital Output pin |
| VOUT | Analog Output |
| GND | Ground pin |
Installation
Arduino
- Connect differential sensor breakout with Arduino uno as shown below :
 |
|
- Now visit the below link for Arduino source code.
Raspberry Pi
Connect differential sensor breakout with Raspberry Pi as shown below :
 |
|
- Now visit the below link for Raspberry Pi source code.
https://github.com/sbcshop/Differential-Pressure-Sensor-Breakout/blob/main/Python/diff_pressure.py
Resources
Github
Datasheet