Pico-Motor-Driver-Hat

Pico Motor Driver HAT

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6V-12V DC. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a compact size with high efficiency.

Features

On Board GPIO Stacking Header.

Motor Input Supply Range : 6V- 12V DC.

One H-Bridge IC L293D.

Stackable Header and Screw Terminal for Motor Supply.

On board LDO to Power Pico directly through Stackable Header.

Specifications

Motor Control - Up to 2 DC Motor or 1 StepperMotor

Motor Input Supply - 6 - 12V

On/Off Switch - yes

External Output - Yes, for Pico

Pinout

Installation

MicroPython

Stack Raspberry Pi Pico on female header of Pico Motor Driver HAT.

Connect USB cable on Raspberry Pi Pico USB port.

Now use example code "Motor_Test.py" from Pico Motor Driver HAT's github repository in any micropython supported ide (preferred thonny ide).

Source code : https://github.com/sbcshop/Pico-Motor-Driver

Copy paste code in thonny ide

Choose interpreter as MicroPython (Raspberry Pi pico).

Connect Motor and external supply as shown below and turn on slider Switch:

Click on green play button to run example on Pico Motor Driver HAT.