Difference between revisions of "Motor-Driver-Microbit"
From SB-Components Wiki
| Line 43: | Line 43: | ||
== Programming == | == Programming == | ||
==== Drag and Drop ==== | ==== Drag and Drop ==== | ||
| − | + | Many people want to learn the process to learn more about micro:bit by getting an understanding of the potential of micro:bit. If one wants to run servo motor and C motor with the micro:bit motor driver then they can do the following steps. | |
| + | |||
| + | A user needs to connect the PWM servo motor to the connector(3 pin header) of the servo driver board, labelled as P0, P1, and P2 to connect up to 3 servo motors. | ||
| + | Take micro:bit and stack it on the motor driver board’s edge connector. | ||
| + | Connect VIN and ground or the external power supply to the motor driver to provide power to it. | ||
| + | A user needs to switch on the slider switch of the motor driver. | ||
| + | See the example codes and drag and drop features on makecode | ||
| + | Start a new project by clicking on create project | ||
| + | A user needs to add an extension for SB motor driver via clicking on the tab(advanced) >> Extensions and enter the mentioned URL below. | ||
| + | https://github.com/sbcshop/Micro-Bit-Motor-Driver | ||
| + | |||
| + | micro:bit motor controller | ||
| + | Click on search | ||
| + | Now look for the search result to add the extension to the project(current). makecode micro:bit | ||
| + | Control your servo motor by motor driver Extension feature. | ||
| + | micro:bit DC motor controller | ||
== Resources == | == Resources == | ||
Revision as of 05:29, 12 May 2021
Motor Driver for Micro:Bit
Motor Driver for micro:bit is introduced as the latest edition of a range of SB Components that can interface with up to 2 DC motors and 3 pwm based Servo motors. It works on Motor Power supply: 6V~12V (VIN terminal) an output current of up to 3A with a powerful integrated TB6612FNG Module IC that scales up the performance. VIN terminal can be used for providing the power to the Motor driver for micro:bit.
Features
Specifications
Pinout
| PIN | Description |
|---|---|
| Vcc | Power (6~12V) |
| GND | Ground |
| MA1 | Positive Terminal of motor A |
| MA2 | Negative Terminal of motor A |
| MB1 | Positive Terminal of motor B |
| MB2 | Negative Terminal of motor B |
| P0 | Servo 1 Control Pin |
| P1 | Servo 2 Control Pin |
| P2 | Servo 3 Control Pin |
Programming
Drag and Drop
Many people want to learn the process to learn more about micro:bit by getting an understanding of the potential of micro:bit. If one wants to run servo motor and C motor with the micro:bit motor driver then they can do the following steps.
A user needs to connect the PWM servo motor to the connector(3 pin header) of the servo driver board, labelled as P0, P1, and P2 to connect up to 3 servo motors. Take micro:bit and stack it on the motor driver board’s edge connector. Connect VIN and ground or the external power supply to the motor driver to provide power to it. A user needs to switch on the slider switch of the motor driver. See the example codes and drag and drop features on makecode Start a new project by clicking on create project A user needs to add an extension for SB motor driver via clicking on the tab(advanced) >> Extensions and enter the mentioned URL below. https://github.com/sbcshop/Micro-Bit-Motor-Driver
micro:bit motor controller Click on search Now look for the search result to add the extension to the project(current). makecode micro:bit Control your servo motor by motor driver Extension feature. micro:bit DC motor controller