Difference between revisions of "Pico-Lora-Expansion-board"
From SB-Components Wiki
(→Pinout) |
(→Pinout) |
||
Line 50: | Line 50: | ||
<table class="wikitable"> | <table class="wikitable"> | ||
<tr> <th>PICO Lora Board </th> <th> PICO Pins </th></tr> | <tr> <th>PICO Lora Board </th> <th> PICO Pins </th></tr> | ||
− | |||
<tr> <td> LCD DIN </td> <td> GP11 </td></tr> | <tr> <td> LCD DIN </td> <td> GP11 </td></tr> | ||
<tr> <td> LCD CLK </td> <td> GP10 </td></tr> | <tr> <td> LCD CLK </td> <td> GP10 </td></tr> |
Revision as of 09:04, 18 May 2021
Pico Lora Board (868MHz)
Pico LoRa™ Expansion is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S SMA antenna connector that covers 868MHz frequency band , Onboard 1.14" LCD,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.
Features
- Onboard 1.14" LCD
- Voltage Level Translator(74HC125V)
- Communication range up to 5 KM
- Supports auto repeating to transmit longer
- Low Power Consumption
- Highly Secured
- For Evaluating signal quality with the RSSI or "Received Signal Strength Indicator"
- Wireless parameter configuration support
- fixed-point transmission support
- SMA and IPEX Antenna Connector
- USB to LoRaTM and Pico to LoRaTM Communication via UART
- Comes with development resources and manual
- LED Indicators:
- RXD/TXD: UART RX/TX indicator
- AUX: auxiliary indicator
- PWR: power indicator
- Serial/USB selection jumpers:
- A: USB TO UART to control the LoRa module through USB
- B: control the LoRa module through Raspberry Pi Pico
- Data/Command mode selection jumpers :
- Short M0, short M1: Transmission mode
- Short M0, open M1: Configuration mode
- Open M0, short M1: WOR mode
- Open M0, open M1: Deep sleep mode
Specifications
- Frequency - 850.125~930.125MHz (Programmable Range)
- Power - 22dBm
- Distance - Up to 5 KM
- Interface - UART Communication
- Serial Port Module - E22-900T22S1B
- Voltage Level Translator - 74HC125V
Pinout
PICO Lora Board | PICO Pins |
---|---|
LCD DIN | GP11 |
LCD CLK | GP10 |
LCD DC | GP8 |
LCD CS | GP9 |
LCD RST | GP12 |
LCD BL | GP13 |
M0 | GP3 |
M1 | GP2 |
Lora TX | GP1 |
Lora RX | GP0 |