Difference between revisions of "Pico-2g-expansion"
From SB-Components Wiki
| Line 21: | Line 21: | ||
* Operating Temperature - -400 ~ 800 C | * Operating Temperature - -400 ~ 800 C | ||
* Dimensions - 68 x 119.64 mm | * Dimensions - 68 x 119.64 mm | ||
| − | |||
</div> | </div> | ||
| Line 28: | Line 27: | ||
</div> | </div> | ||
</div> | </div> | ||
| − | |||
== Pinout == | == Pinout == | ||
<table class="wikitable"> | <table class="wikitable"> | ||
Revision as of 10:57, 8 September 2021
Pico 2G Expansion (Incomplete Wiki)
Raspberry Pi Pico 2G Expansion is a QUAD-Band GSM/GPRS/GNSS Expansion designed dedicatedly for Raspberry Pi Pico with UART, USB 2.0 Interface, 850/900/1800/1900 MHz, Bluetooth 3.0 based on SIM868 module to perform easy and efficient communication. Pico 2G Expansion works on the embedded TCP/UDP Protocols with Multi-constellation GNSS receiver support.
Pico 2G Expansion also includes a 1.14-inch display with a resolution of 240 x 135 pixels, 65K RGB colors, and a sharp and vivid exhibiting effect, designed primarily for user engagement via SPI connection by incorporating a GPIO header. The 1.14-inch LCD includes the ST7789 Driver and SPI Interface, decreasing the amount of IO pins required.
Features
- 1.14” LCD
- Low Power Consumption
- 850/900/1800/1900 MHz Frequency band
- Bluetooth 3.0
- LED Indicators
- Serial/USB/SIM868 Selection Jumpers
Specifications
- Operating Voltage - 5V(via USB)
- Communication - UART/USB 2.0
- SIM Module - SIM868
- Compatibility - Raspberry Pi Pico
- Operating Temperature - -400 ~ 800 C
- Dimensions - 68 x 119.64 mm
File:Pico 2g expansion.png
Buy it From : Click Here
Pinout
| PICO 2G Board | PICO Pins |
|---|---|
| VCC | 5V |
| GND | GND |
| LCD DIN | GP11 |
| LCD CLK | GP10 |
| LCD DC | GP8 |
| LCD CS | GP9 |
| LCD RST | GP12 |
| LCD BL | GP13 |
Installation
MicroPython
Resources
- 'Software
- Github