Difference between revisions of "Round-LCD-HAT"

Revision as of 05:49, 7 May 2021

Round LCD HAT

Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface. The Round LCD HAT comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins. It is designed with a 5-input Joystick that will be internally connected to the Round LCD HAT via a stackable GPIO connector header.

Features

240 x 240 Resolution

32.4mm Diameter

IPS Display Panel

GC9A01 Driver

Raspberry Pi series compatibility

4-wire SPI Communication

Standard Raspberry Pi 40 Pins GPIO

4 directions + attached band Central press button Joystick Control

Specifications

Operating Voltage - 3.3 V

Pixel Size - 0.135 × 0.135mm

Board Dimension - 56mm × 65mm

Pixels - 240×240 resolution

Display Colour - 65K RGB

Driver - GC9A01

File:Pico Breadboard.png

Pinout

Installation

Python

Open a terminal and run the following commands to enable I2C and Serial：

 sudo raspi-config

Choose Interfacing Options -> SPI -> Yes

You can also use GUI method to enable SPI Go to Menu > Preferences > Raspberry Pi Configuration > Interfaces , and enable SPI

Stack Round LCD HAT on top of Raspberry Pi GPIO Header pins.
Make Sure SPI is Enabled (As mentioned above)
Now clone Round LCD HAT Github repository by running below command in terminal

 git clone https://github.com/sbcshop/Round-LCD-HAT.git

Enter dowloaded directory

 cd Round-LCD-HAT

Now run demo.py by running below command.

 python3 demo.py

Resources

@@ Line 40: / Line 40: @@
 * You can also use GUI method to enable SPI Go to Menu > Preferences > Raspberry Pi Configuration > Interfaces , and enable SPI
-https://github.com/sbcshop/Round-LCD-HAT/blob/main/images/spi_en_gui.png
+[[File:Spi_en_gui.png]]
 * Stack Round LCD HAT on top of Raspberry Pi GPIO Header pins.