Difference between revisions of "USB-RTC"

Revision as of 06:12, 8 June 2021

USB RTC

USB RTC is an open source real time clock device that comprises MCP2221, a USB-to-UART/I2C serial converter, which enables USB connectivity, in the processes that include a USB, UART(Serial), GPIO, and I2C interfaces. It runs on Hi-tech DS3231 RTC chip, an accurate I2C, runs the USB RTC with extremely high efficiency at a low cost. USB RTC for Raspberry Pi has cross platform support which makes it enable to work on different platforms like Windows, MAC, etc.

Features

Temperature-compensated crystal oscillator

DS3231 advanced processor

MCP2221

I2C/SMBus supported clock and data lines

User-selectable via jumper cable for 3.3V or 5V level output (up to 500 mA)

Four GPIO lines that are configurable for GPIO Operations

Pins for Serial(UART) Communication

Supports full-speed USB (12 Mb/s)

64-byte Transmit

64-byte Receive

USB 2.0 Compliant

Low-Power Consumption

Specifications

Accuracy ±2ppm from 0°C to +40°C

Accuracy ±3.5ppm from -40°C to +85°C

Battery Backup Input for Continuous Timekeeping

Operating Temperature Ranges Commercial: 0°C to +70°C Industrial: -40°C to +85°C

Low-Power Consumption

Real-Time Clock Counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap Year Compensation Valid Up to 2100

Two Time-of-Day Alarms

Programmable Square-Wave Output

Fast (400kHz) I2C Interface

3.3V Operation

Digital Temp Sensor Output: ±3°C Accuracy

Buy it From : Click Here

Installation

Python

Install MCP2221 Library by running below command on terminal:

pip3 install PyMCP2221A

Connect USB-RTC on USB Port of Raspberry Pi/Windows.
Now clone/download USB-RTC Github Repository by running below command:

git clone https://github.com/sbcshop/USB-RTC.git

Now enter downloaded folder from home/pi or by rnning below command:

cd USB-RTC

Now run test.py file by running below command:

python3 test.py

Resources

MCP2221 Datasheet

@@ Line 43: / Line 43: @@
 ==== Python ====
 * Install MCP2221 Library by running below command on terminal:
-<pre> pip3 install PyMCP2221A </pre>
+<source lang="shell"> pip3 install PyMCP2221A </source>
 * Connect USB-RTC on USB Port of Raspberry Pi/Windows.
 * Now clone/download USB-RTC Github Repository by running below command:
-<pre> git clone https://github.com/sbcshop/USB-RTC.git </pre>
+<source lang="shell"> git clone https://github.com/sbcshop/USB-RTC.git </source>
 * Now enter downloaded folder from home/pi or by rnning below command:
-<pre> cd USB-RTC </pre>
+<source lang="shell"> cd USB-RTC </source>
 * Now run test.py file by running below command:
-<pre> python3 test.py </pre>
+<source lang="shell"> python3 test.py </source>
 == Resources ==
 [https://cdn.shopify.com/s/files/1/1217/2104/files/MCP2221-Datasheet.pdf| MCP2221 Datasheet]