Difference between revisions of "Home-Automation-HAT"
From SB-Components Wiki
| Line 5: | Line 5: | ||
=== Features === | === Features === | ||
| − | + | * Compatible with Raspberry Pi 4, 3B+,3,2,Zero | |
| + | * Relay Status Indicator | ||
| + | * Comes With Development Resources, including examples in Python | ||
| + | * COM, NO(Normally Open) & NC(Normally Closed) are available for each relay | ||
| + | * Connectivity of Relay With RPi Without GPIO | ||
| + | * Connectivity Using Stack Method | ||
| + | * Onboard Power LED Indicator | ||
| + | * Make Your Home IoT Enabled | ||
| + | * Relay Control Pins Selection Jumper | ||
=== Specifications === | === Specifications === | ||
Revision as of 05:38, 28 September 2021
Home Automation HAT
Home Automation HAT is a Home monitoring and automation controller HAT for the Raspberry Pi that can control up to 2 appliances/devices on a load of 250 VAC/7A, 30 VDC/10A, photo-coupling isolation Optocoupler EL357NC, allowing users to safely control high voltages or current devices. Home-Automation HAT makes appliances smart, which users can operate via the PiRelay app on their electronic device.
Features
- Compatible with Raspberry Pi 4, 3B+,3,2,Zero
- Relay Status Indicator
- Comes With Development Resources, including examples in Python
- COM, NO(Normally Open) & NC(Normally Closed) are available for each relay
- Connectivity of Relay With RPi Without GPIO
- Connectivity Using Stack Method
- Onboard Power LED Indicator
- Make Your Home IoT Enabled
- Relay Control Pins Selection Jumper
Specifications
Buy it From : Click Here
Pinout
| Relays | BOARD | BCM |
|---|---|---|
| Relay 1 | 29 | GPIO 5 |
| Relay 2 | 31 | GPIO 6 |
| Relay 3 | 33 | GPIO 13 |
| Relay 4 | 35 | GPIO 19 |
| Relay 5 | 37 | GPIO 26 |
| Relay 6 | 40 | GPIO 21 |
Installation
Python
Resources
Github