Pico-4CH-Expander

Pico 4 Channel Expander

Pico 4 CH Expander is an I/O Expansion board for the Raspberry Pi Pico that allows you to increase your engagement by using the four GPIO ports allocated to the HAT or Shield. Pico 4 CH Expander is a GPIO extender with four sets of two x 20 pin headers for use with HATs or Breadboards. It consists of the onboard USB interfacing to provide power only to board and not for data transmission.

Features

• Standard Raspberry Pi Pico connectivity
• 4 sets of 2 x 20 Pin Male Headers
• Compatible with Raspberry Pi Pico
• Descriptive Pin labels
• Onboard USB power port

Specifications

• Connector for HAT - Male Header Pins
• Compatibility - Any Raspberry Pi Pico HAT/Shield

Buy it From : Click Here

Installation

• Take Raspberry Pi Pico 4 CH Expander.

• Stack Raspberry Pi Pico on 40 pins female header of Raspberry Pi Pico 4 CH Expander as shown in picture below.

• Now you can connect any Pico compatible HAT’s or peripherals or breadboard circuits with the Raspberry Pi Pico 4 CH Expander. You can supply power to the expander via the onboard USB Input port.

Note: In the case of utilization of HAT, the USB mark of the HAT should be aligned with the Pico 4 CH Expander.