LoRa-HAT-for-Raspberry-Pi

LoRa HAT for Raspberry Pi (433/868/915)

LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Features

• Communication range up to 5 KM
• Supports auto repeating to transmit longer
• Low Power Consumption
• Highly Secured
• For Evaluating signal quality with the RSSI or “Received Signal Strength Indicator”
• Wireless parameter configuration support
• Fixed-point transmission support
• SMA and IPEX Antenna Connector
• USB to LORaTM and Pi to LoRaTM Communication via UART
• Comes with development resources and manual
• LED Indicators:

RXD/IXD: UART RX/TX indicator

AUX: Auxiliary indicator

PWR: Power indicator

• Serial/USB selection Jumpers:

A: USB TO DART to control the LoRa module through USB

B: Control the LoRa module through Raspberry Pi

• Data/Command made selection jumpers:

Short M0, short M1: Transmission mode

Short M0, open M1: Configuration mode

Open M0, short M1: WOR mode

Open M0, open M1: Deep sleep mode

Specifications

• Frequency - 915/868/433 MHz
• Power - 22dBm
• Distance - Up to 5 KM
• Interlace - DART Communication
• Serial Port Module - E22-900T22S/E22-400T22S
• Voltage Level Translator - 74HC125V