Difference between revisions of "Differential-pressure-breakout"

From SB-Components Wiki

Line 37: Line 37:
  
 
== Installation ==
 
== Installation ==
The 8-bit level shifter breakout device has two functional modes, enabled and disabled. To disable the device, set the '''OE input'''
 
low (By default set to High using '''resistor R2'''), which places all I/Os in a high impedance state. Setting the OE input high will enable the device.
 
  
==== Block Diagram ====
+
==== Arduino ====
* Typical Application Block Diagram for TXB0108
 
[[File:Level_shifter_block.PNG| Application Block Diagram]]
 
  
==== Reference Circuit ====
+
 
[[File:8bit_level_shifter_ref_ckt.jpg| 600px]]
+
==== Raspberry Pi ====
  
 
== Resources ==
 
== Resources ==

Revision as of 06:06, 24 June 2021

8 Bit Level Shifter Breakout

Differential Pressure Breakout comprises NXP's MPXV5010DP, is an Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated, and Calibrated. Differential Pressure Breakout consists of two axial ports to accommodate industrial grade tubing. In the temperature range between 0º and 85ºC, the maximum error rate of the sensor is 5.0%.

Features

  • MPXV5010DP has an analog output
  • Temperature Compensated over -40 to +125C
  • The signal passes through the onboard 22-bit ADC before being outputted through the SPI interface
  • Durable Epoxy Unibody and Thermoplastic (PPS) Surface Mount Package.

Specifications

  • Operating Pressure - 1.45 psi
  • Port Type - Dual Radial Barbed
  • Port Size - 4.93 mm
  • Interface- SPI / Analog Interface
  • Measurement range- 0 to 10 kPa

Pinout

Pinout Description
VCC Positive Supply Voltage pin (5V)
CS Chip Select Digital Input pin
SCK Serial Clock Digital Input pin
MISO Data/Ready Digital Output pin
VOUT Analog Output
GND Ground pin

Installation

Arduino

Raspberry Pi

Resources