Difference between revisions of "Differential-pressure-breakout"

From SB-Components Wiki

Line 60: Line 60:
  
 
==== Raspberry Pi ====
 
==== Raspberry Pi ====
 +
Connect differential sensor breakout with Raspberry Pi as shown below :
 +
<table><tr><td>
 +
<img src="https://raw.githubusercontent.com/sbcshop/Differential-Pressure-Sensor-Breakout/main/images/diff_pressure_raspberry.png" width="500" height="500 /> </td>
 +
<td>
 +
<table class="wikitable">
 +
<tr> <th> Pinout </th> <th> Raspberry Pi (BCM) </th></tr>
  
<img src="https://raw.githubusercontent.com/sbcshop/Differential-Pressure-Sensor-Breakout/main/images/diff_pressure_raspberry.png" width="500" height="500 />
+
<tr> <td> VCC </td> <td> 5V </td></tr>
 +
<tr> <td> CS </td> <td>  GPIO 8 </td></tr>
 +
<tr> <td> SCK </td> <td>  GPIO 11 </td></tr>
 +
<tr> <td> MISO </td> <td>  GPIO 9 </td></tr>
 +
<tr> <td> VOUT </td> <td> Not Connected </td></tr>
 +
<tr> <td> GND </td> <td> Ground pin </td></tr>
 +
</table> </td> </tr> </table>
 +
</td> </tr> </table>
  
 
== Resources ==
 
== Resources ==

Revision as of 06:57, 24 June 2021

Differential Pressure Breakout

Differential Pressure Breakout comprises NXP's MPXV5010DP, is an Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated, and Calibrated. Differential Pressure Breakout consists of two axial ports to accommodate industrial grade tubing. In the temperature range between 0º and 85ºC, the maximum error rate of the sensor is 5.0%.

Features

  • MPXV5010DP has an analog output
  • Temperature Compensated over -40 to +125C
  • The signal passes through the onboard 22-bit ADC before being outputted through the SPI interface
  • Durable Epoxy Unibody and Thermoplastic (PPS) Surface Mount Package.

Specifications

  • Operating Voltage : 5V
  • Operating Pressure - 1.45 psi
  • Port Type - Dual Radial Barbed
  • Port Size - 4.93 mm
  • Interface- SPI / Analog Interface
  • Measurement range- 0 to 10 kPa

Pinout

Pinout Description
VCC Positive Supply Voltage pin (5V)
CS Chip Select Digital Input pin
SCK Serial Clock Digital Input pin
MISO Data/Ready Digital Output pin
VOUT Analog Output
GND Ground pin

Installation

Arduino

  • Connect differential sensor breakout with Arduino uno as shown below :
Pinout Arduino
VCC 5V
CS Digital Pin 8
SCK Digital Pin 13
MISO Digital Pin 12
VOUT A0 (In case you are using Analog interface)
GND Ground pin
  • Now visit the below link for Arduino source code.

https://github.com/sbcshop/Differential-Pressure-Sensor-Breakout/blob/main/Arduino/diff_pressure/diff_pressure.ino

Raspberry Pi

Connect differential sensor breakout with Raspberry Pi as shown below :

Pinout Raspberry Pi (BCM)
VCC 5V
CS GPIO 8
SCK GPIO 11
MISO GPIO 9
VOUT Not Connected
GND Ground pin

Resources

Github

Datasheet