LoRa-HAT-for-Raspberry-Pi

From SB-Components Wiki

Revision as of 10:08, 20 January 2022 by Sbcshop (talk | contribs) (Created page with "== LoRa HAT for Raspberry Pi (433/868/915) == LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

LoRa HAT for Raspberry Pi (433/868/915)

LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Features

  • Communication range up to 5 KM
  • Supports auto repeating to transmit longer
  • Low Power Consumption
  • Highly Secured
  • For Evaluating signal quality with the RSSI or “Received Signal Strength Indicator”
  • Wireless parameter configuration support
  • Fixed-point transmission support
  • SMA and IPEX Antenna Connector
  • USB to LORaTM and Pi to LoRaTM Communication via UART
  • Comes with development resources and manual
  • LED Indicators:

RXD/IXD: UART RX/TX indicator

AUX: Auxiliary indicator

PWR: Power indicator

  • Serial/USB selection Jumpers:

A: USB TO DART to control the LoRa module through USB

B: Control the LoRa module through Raspberry Pi

  • Data/Command made selection jumpers:

Short M0, short M1: Transmission mode

Short M0, open M1: Configuration mode

Open M0, short M1: WOR mode

Open M0, open M1: Deep sleep mode


Specifications

  • Frequency - 915/868/433 MHz
  • Power - 22dBm
  • Distance - Up to 5 KM
  • Interlace - DART Communication
  • Serial Port Module - E22-900T22S/E22-400T22S
  • Voltage Level Translator - 74HC125V