Difference between revisions of "Pi-breadboard-Adapter"

From SB-Components Wiki

Line 28: Line 28:
 
[[File:Pi_brd_adapter2.png]]
 
[[File:Pi_brd_adapter2.png]]
 
* Now use 40 pin IDC cable to make the connection between breadboard adapter and Raspberry Pi
 
* Now use 40 pin IDC cable to make the connection between breadboard adapter and Raspberry Pi
 +
[[File:Pi_brd_adapter3.png]]
  
 +
Now you can use this breadboard to place your components and develop your project with ease of connectivity using breadboard breakout.
  
 
== Resources ==
 
== Resources ==

Revision as of 11:15, 18 June 2021

Raspberry Pi Breadboard Adapter

Raspberry Pi Breadboard Adaptor is a compact, T-shaped, 40 GPIO Pinned breakout module that can be used with a 40 pin ribbon cable into the header. A user can take out all the GPIO, I2C, and SPI pins on the breadboard.

Features

  • Supports Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4.
  • Make connection with the jumpers
  • Neat and Clean Pin Labels
  • No tools or soldering required for installation.
  • Easy Raspberry Pi to breadboard prototyping.

Specifications

  • Pins - 40 Pin IDC Connector and 2 x 20 male header for breadboard connectivity
  • Connector Pins - 2 x 20
  • Dimensions: 7 x 5 x 2 cm (Approx.)

Installation

  • Take one Raspberry Pi breadboard adapter.

Pi brd adapter1.png

  • Now place male berg side of the adapter to breadboard as shown below.

Pi brd adapter2.png

  • Now use 40 pin IDC cable to make the connection between breadboard adapter and Raspberry Pi

File:Pi brd adapter3.png

Now you can use this breadboard to place your components and develop your project with ease of connectivity using breadboard breakout.

Resources