Difference between revisions of "Pi-breadboard-breakout"

From SB-Components Wiki

Line 23: Line 23:
  
 
== Installation ==
 
== Installation ==
* Take one Raspberry pi breadboard breakout board.
+
* Take one Raspberry Pi breadboard breakout board.
 
[[File:Pi_brd_breakout1.png | 400px]]
 
[[File:Pi_brd_breakout1.png | 400px]]
 
* Place it on any size of a breadboard as shown below.
 
* Place it on any size of a breadboard as shown below.

Revision as of 10:57, 18 June 2021

Raspberry Pi Breadboard Breakout

Easy way to connect breadboards from Raspberry Pi by using Raspberry Pi Breadboard Breakout. It allows you to connect or plug a Raspberry Pi into a standard 2.54 mm pitch Breadboard. The Raspberry Pi Breadboard Breakout PCB is designed to connect across the middle slot of a breadboard.

Features

  • Supports Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4.
  • Cable plugs between the Pi A+ / B+ / Pi 2 / Pi 3 / Pi 4 computer and the breadboard breakout.
  • The Breadboard breakout PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.
  • No tools or soldering required for installation.
  • Raspberry Pi to breadboard prototyping is made easy.

Specifications

  • 63mm x 20mm x 11mm / 2.5" x 0.8" x 0.4"
  • Height with pins: 20mm / 0.8"
  • Weight: 12g

Installation

  • Take one Raspberry Pi breadboard breakout board.

Pi brd breakout1.png

  • Place it on any size of a breadboard as shown below.

Pi brd breakout2.png

  • Use IDC cable to make the connection between breadboard breakout and Raspberry Pi.

Pi brd breakout3.png

Now you can use this breadboard to place your components and develop your project with ease of connectivity using breadboard breakout.

Resources