Difference between revisions of "PiTraffic"

From SB-Components Wiki

 
(2 intermediate revisions by the same user not shown)
Line 32: Line 32:
 
<tr><td> South Led's  </td>  <td> '''RED:''' GPIO 17,    '''YELLOW:''' GPIO 27,  '''GREEN:''' GPIO 22 </td></tr>
 
<tr><td> South Led's  </td>  <td> '''RED:''' GPIO 17,    '''YELLOW:''' GPIO 27,  '''GREEN:''' GPIO 22 </td></tr>
 
<tr><td> West Led's  </td>  <td> '''RED:''' GPIO 23,    '''YELLOW:''' GPIO 24,  '''GREEN:''' GPIO 25 </td></tr>
 
<tr><td> West Led's  </td>  <td> '''RED:''' GPIO 23,    '''YELLOW:''' GPIO 24,  '''GREEN:''' GPIO 25 </td></tr>
<tr><td> South Led's  </td>  <td> '''RED:''' GPIO 5,    '''YELLOW:''' GPIO 6,  '''GREEN:''' GPIO 13 </td></tr>
+
<tr><td> North Led's  </td>  <td> '''RED:''' GPIO 5,    '''YELLOW:''' GPIO 6,  '''GREEN:''' GPIO 13 </td></tr>
<tr><td> South Led's  </td>  <td> '''RED:''' GPIO 16,    '''YELLOW:''' GPIO 20,  '''GREEN:''' GPIO 21 </td></tr>
+
<tr><td> East Led's  </td>  <td> '''RED:''' GPIO 16,    '''YELLOW:''' GPIO 20,  '''GREEN:''' GPIO 21 </td></tr>
  
 
</table>
 
</table>
Line 39: Line 39:
 
== Installation ==
 
== Installation ==
 
==== Python ====
 
==== Python ====
 +
* Stack PiTraffic board on Raspberry Pi.
 +
 +
* Now attach traffic light stands on the traffic light male berg connector.
 +
 +
* Now clone the GitHub repository by running the below command:
 +
 +
<source lang="shell"> git clone https://github.com/sbcshop/PiTraffic.git </source>
 +
 +
* Enter downloaded repository by running the below command:
 +
 +
<source lang="shell"> cd PiTraffic </source>
 +
 +
* Now run demo file using python3 command.
 +
 +
<source lang="shell">python3 TrafficTest.py </source>
  
 
<br>
 
<br>

Latest revision as of 08:36, 5 July 2021

PiTraffic

PiTraffic is a low-cost Raspberry Pi HAT to make the users more connected with the real-world traffic light system. It operates on the 5V input with the programmable buzzer and buttons which are connected directly to the GPIO Port. It is a set of 4 traffic lights with the colorful LED(Red, Green, and Yellow).

Features

  • No Soldering Required
  • Low-Cost Traffic Light HAT
  • Buzzer as Roundabout
  • 40-pin female header included boosting height for Raspberry Pi

Specifications

  • Power Supply - 5V
  • Traffic light Stands - 4
  • Programmable Buzzer - Yes
  • Push button - 1
PiTraffic
Buy it From : Click Here

Pinout

Servo Driver HAT BCM
VCC 5V
GND GND
Buzzer GPIO 18
Button GPIO 4
South Led's RED: GPIO 17, YELLOW: GPIO 27, GREEN: GPIO 22
West Led's RED: GPIO 23, YELLOW: GPIO 24, GREEN: GPIO 25
North Led's RED: GPIO 5, YELLOW: GPIO 6, GREEN: GPIO 13
East Led's RED: GPIO 16, YELLOW: GPIO 20, GREEN: GPIO 21

Installation

Python

  • Stack PiTraffic board on Raspberry Pi.
  • Now attach traffic light stands on the traffic light male berg connector.
  • Now clone the GitHub repository by running the below command:
git clone https://github.com/sbcshop/PiTraffic.git
  • Enter downloaded repository by running the below command:
cd PiTraffic
  • Now run demo file using python3 command.
python3 TrafficTest.py


Resources

Github