Pico-wifi-HAT

From SB-Components Wiki

Pico Wi-Fi HAT

Pico Wi-Fi HAT is a compact and easy-to-use Wi-Fi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n Wi-Fi Standard, 3.3 V Operating Voltage, UART Communication interface, and a 40-pin GPIO extension header that can be controlled via AT Command and supports TCP/UDP communication protocol.

Pico Wi-Fi HAT also includes a 1.14-inch display with a resolution of 240 x 135 pixels, 65K RGB colors, and a sharp and vivid exhibiting effect, designed primarily for user engagement via SPI connection by incorporating a GPIO header. The 1.14-inch LCD includes the ST7789 Driver and SPI Interface, decreasing the amount of IO pins required.

It's a simple way to enable Wi-Fi on the Raspberry Pi Pico, making it suitable for a variety of IoT communication projects. It is intended for developers of all skill levels, from the most experienced to those who are just getting started with IoT devices.

Features

  • ESP8266 module with four-layers process
  • Standard Raspberry Pi Pico 40-pin GPIO extension header
  • Supports STA, AP, and STA+AP three Wi-Fi operating modes, embedded LWIP protocol stack, supports TCP/UDP communication
  • 2x functional buttons
  • Comes with development resources and manual

Specifications

  • Operating Voltage - 3.3 V (Internally connected on Pico 3v3 pin)
  • Communication - UART Interface
  • UART BAUD RATE - 115200 bps
  • Wi-Fi Standard - IEEE 802.11b/g/n
  • Frequency Range - 2400 ~ 2483.5 MHz
  • Wi-Fi Operating Mode - Wi-Fi STA, Wi-Fi AP, Wi-Fi STA+AP
  • Protocol - TCP, UDP
  • Antenna - PCB Antenna
  • Operating Temperature - -40℃ ~ 85℃

Pinout

Installation

MicroPython

Resources