Difference between revisions of "Round-LCD-HAT"

Revision as of 06:11, 8 June 2021

Round LCD HAT

Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface. The Round LCD HAT comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins. It is designed with a 5-input Joystick that will be internally connected to the Round LCD HAT via a stackable GPIO connector header.

Features

240 x 240 Resolution

32.4mm Diameter

IPS Display Panel

GC9A01 Driver

Raspberry Pi series compatibility

4-wire SPI Communication

Standard Raspberry Pi 40 Pins GPIO

4 directions + attached band Central press button Joystick Control

Specifications

Operating Voltage - 3.3 V

Pixel Size - 0.135 × 0.135mm

Board Dimension - 56mm × 65mm

Pixels - 240×240 resolution

Display Colour - 65K RGB

Driver - GC9A01

Buy it From : Click Here

Pinout

Installation

Python

Open a terminal and run the following commands to enable I2C and Serial：

sudo raspi-config

Choose Interfacing Options -> SPI -> Yes

You can also use GUI method to enable SPI Go to Menu > Preferences > Raspberry Pi Configuration > Interfaces, and enable SPI

Stack Round LCD HAT on top of Raspberry Pi GPIO Header pins.
Make Sure SPI is Enabled (As mentioned above)
Now clone Round LCD HAT Github repository by running below command in terminal

git clone https://github.com/sbcshop/Round-LCD-HAT.git

Enter dowloaded directory

cd Round-LCD-HAT

Now run demo.py by running below command.

python3 demo.py

You can also run "LcdDemo_Joystick.py" file to display the image and change the color of the arc using the attached 5 input joystick.

python3 LcdDemo_Joystick.py

@@ Line 34: / Line 34: @@
 ==== Python ====
 * Open a terminal and run the following commands to enable I2C and Serial：
-<pre> sudo raspi-config </pre>
+<source lang="shell"> sudo raspi-config </source>
 * Choose Interfacing Options -> SPI -> Yes
-* You can also use GUI method to enable SPI Go to Menu > Preferences > Raspberry Pi Configuration > Interfaces , and enable SPI
+* You can also use GUI method to enable SPI Go to Menu > Preferences > Raspberry Pi Configuration > Interfaces, and enable SPI
 [[File:Spi_en_gui.png]]
@@ Line 45: / Line 45: @@
 * Make Sure SPI is Enabled (As mentioned above)
 * Now clone Round LCD HAT Github repository by running below command in terminal
-<pre> git clone https://github.com/sbcshop/Round-LCD-HAT.git </pre>
+<source lang="shell"> git clone https://github.com/sbcshop/Round-LCD-HAT.git </source>
 * Enter dowloaded directory
-<pre> cd Round-LCD-HAT </pre>
+<source lang="shell"> cd Round-LCD-HAT </source>
 * Now run demo.py by running below command.
-<pre> python3 demo.py </pre>
+<source lang="shell"> python3 demo.py </source>
-* You can also run "LcdDemo_Joystick.py" file to display image and change color of arc using attached 5 input joystick.
+* You can also run "LcdDemo_Joystick.py" file to display the image and change the color of the arc using the attached 5 input joystick.
-<pre> python3 LcdDemo_Joystick.py </pre>
+<source lang="shell"> python3 LcdDemo_Joystick.py </source>
 == Resources ==