View source for 1.28-round-lcd-breakout

<div class="row">
  <div class="large-8 column">
== 1.28" Round LCD Breakout ==
The 1.28" Round LCD Breakout is a 1.28-inch display breakout with 240 x 240 resolution, 65K RGB colours, and a clear and colourful displaying effect meant to help gadgets increase their interaction via SPI connection by providing a GPIO header for easy interface. The GC9A01 display driver and SPI interface are integrated into the 1.28" Round LCD Breakout, decreasing the number of IO pins required.

=== Features ===
* 4-wire SPI Communication
* GPIO header for easy interfacing 
* Cross-Platform compatibility
* 1.28” Round LCD

=== Specifications ===
* Operating Voltage - 3.3 V
* Pixel Size - 0.135 × 0.135mm
* Board Dimension - 36mm x 44mm
* Pixels - 240×240 resolution
* Display Colour - 65K RGB
* Driver - GC9A01 

</div>
  <div class="large-4 column">
[[File:Round_lcd_breakout.png|thumb|left|alt=Pico 1.28 Round LCD Breakout| Buy it From : ''[https://shop.sb-components.co.uk/products/1-28-round-lcd-breakout Click Here]'']]
  </div>
</div>

== Pinout ==
<table class="wikitable">
<tr> <th>Round LCD Breakout</th> <th>Description </th></tr>

<tr> <td> GND </td> <td> Ground Supply </td></tr>
<tr> <td> VCC </td> <td> Power Supply 3.3V - 5V DC </td></tr>
<tr> <td> DIN </td> <td> Serial Data Input / Outout </td></tr>
<tr> <td> CLK </td> <td> Serial Clock </td></tr>
<tr> <td> CS </td> <td> Chip select input pin ("Low" enable) </td></tr>
<tr> <td> DC </td> <td> Display data / Command selection pin </br> DC='1': Display data. </br> DC='0': Command data </td></tr>
<tr> <td> RST </td> <td> Reset Pin. Initialize the chip with a low input </td></tr>
<tr> <td> BL </td> <td> Blacklight Control. High: Blacklight on Low: Blacklight off. </td></tr>

</table>

== Installation ==

==== Arduino ====
* [https://github.com/moononournation/Arduino_GFX '''Arduino Library for 1.28" Round LCD Breakout''']

If you are using Arduino Ide, you can use the above library.

==== PICO RP2040 (MicroPython) ====
*  For running this HAT, you require these components :
** Raspberry Pi Pico X 1
** Pico 1.28" Round LCD Breakout X 1
** USB Cable X 1

* Copy or clone code from Github.
https://github.com/sbcshop/1.28-Round-LCD-Breakout

* Connect LCD breakout with Raspberry Pi Pico as shown in the below pinout.

<table class="wikitable">
<tr> <th>1.28" Round LCD Breakout </th> <th>PICO Pins </th></tr>
<tr> <td> VCC </td> <td> 3.3V / 5V </td></tr>
<tr> <td> GND </td> <td> GND </td></tr>
<tr> <td> LCD DIN </td> <td> GP11 </td></tr>
<tr> <td> LCD CLK </td> <td> GP10 </td></tr>
<tr> <td> LCD DC </td> <td> GP8 </td></tr>
<tr> <td>LCD CS</td> <td> GP9 </td></tr>
<tr> <td> LCD RST </td> <td> GP12 </td></tr>
<tr> <td> LCD BL </td> <td> GP13 </td></tr>
</table>

* Press and hold  '''BOOTSEL''' pin of Raspberry Pi Pico and connect the USB cable, it will create a drive as RPI-RP2.

* Now drag and drog/copy '''firmware.uf2''' file from firmware folder to RPI-RP2 Drive. It will reboot your raspberry pi pico.

* Open Thonny IDE and Choose interpreter as MicroPython (Raspberry Pi pico).
[[File:Thonny-interpreter.PNG|600px]]

* Now you can run example codes from the '''Pico_Example_mpy''' folder in Thonny Ide. For example, Open the '''hello.py''' file in thonny and click on the green play button to run this example.
[[File:Pico_Round_lcd_HAT_thonny.PNG]]

It will print "Hello" on Round LCD. You can use the joystick to change the LCD color.

==== Working Example ====
* This module was tested on Raspberry Pi Pico. You need to provide a SPI object and the pin to use for the DC pin of the screen.

<source lang="python">
import machine
import gc9a01
spi = SPI(1, baudrate=40000000, sck=Pin(10), mosi=Pin(11))
tft = gc9a01.GC9A01(spi, 240, 240, reset=Pin(12, Pin.OUT), cs=Pin(9, Pin.OUT), dc=Pin(8, Pin.OUT), backlight=Pin(13, Pin.OUT), rotation=0)
tft.init()
</source>


==== Functions and Arguments ==== 
* <source inline>  gc9a01.GC9A01(spi, width, height, reset, dc, cs, backlight, rotation, buffer_size) </source>
required arguments:
<source>
`spi` spi device
  `width` display width
  `height` display height
</source>

optional args:
<source>
  `reset` reset pin
  `dc` dc pin
  `cs` cs pin
  `backlight` backlight pin
  `rotation` Orientation of display.
  `buffer_size` 0= buffer dynamically allocated and freed as needed.

  Rotation | Orientation
  -------- | --------------------
     0     | 0 degrees
     1     | 90 degrees
     2     | 180 degrees
     3     | 270 degrees
     4     | 0 degrees mirrored
     5     | 90 degrees mirrored
     6     | 180 degrees mirrored
     7     | 270 degrees mirrored
</source>
If buffer_size is specified it must be large enough to contain the largest bitmap, font character, and/or JPG used (Rows * Columns *2 bytes). Specifying a buffer_size reserves memory for use by the driver otherwise, memory required is allocated and free dynamically as it is needed. Dynamic allocation can cause heap fragmentation so garbage collection (GC) should be enabled.

'''This driver supports only 16bit colors in RGB565 notation.'''

* <source inline> GC9A01.on() </source>

Turn on the backlight pin if one was defined during init.

* <source inline> GC9A01.off() </source>

Turn off the backlight pin if one was defined during init.

* <source inline> GC9A01.pixel(x, y, color) </source>

Set the specified pixel to the given color.

* <source inline> GC9A01.line(x0, y0, x1, y1, color) </source>

Draws a single line with the provided color from (x0, y0) to (x1, y1).

* <source inline> GC9A01.hline(x, y, length, color) </source>

Draws a single horizontal line with the provided color and length in pixels. Along with vline, this is a fast version with reduced number of SPI calls.

* <source inline> GC9A01.vline(x, y, length, color) </source>

Draws a single horizontal line with the provided color and length in pixels.

* <source inline> GC9A01.rect(x, y, width, height, color) </source>

Draws a rectangle from (x, y) with corresponding dimensions

* <source inline> GC9A01.fill_rect(x, y, width, height, color) </source>

Fill a rectangle starting from (x, y) coordinates

Source code credit: https://github.com/russhughes/gc9a01_mpy

== Resources ==
<b> Github </b>
* [https://github.com/sbcshop/1.28-Round-LCD-Breakout Source Code]