Round-LCD-HAT

Round LCD HAT

Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface. The Round LCD HAT comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins. It is designed with a 5-input Joystick that will be internally connected to the Round LCD HAT via a stackable GPIO connector header.

Features

240 x 240 Resolution

32.4mm Diameter

IPS Display Panel

GC9A01 Driver

Raspberry Pi series compatibility

4-wire SPI Communication

Standard Raspberry Pi 40 Pins GPIO

4 directions + attached band Central press button Joystick Control

Specifications

Operating Voltage - 3.3 V

Pixel Size - 0.135 × 0.135mm

Board Dimension - 56mm × 65mm

Pixels - 240×240 resolution

Display Colour - 65K RGB

Driver - GC9A01

Installation

MicroPython

Connect Raspberry Pi Pico on female header of Pico Breadboard Kit.

Connect USB cable on Raspberry Pi Pico USB port.

Use jumper cables to connect Switches , Led's and Buzzer with Raspberry Pi Pico GPIO headers.

Now use example code "Test.py" from pico breadboard kit's github repository in any micropython supported ide (preferred thonny ide).

Source code : https://github.com/sbcshop/Raspberry-Pi-Pico-Breadboard-Kit

Copy paste code in ide and choose interpreter as MicroPython (Raspberry Pi pico).

Click on green play button to run example on Pico Breadboard Kit.