Motor-Driver-Microbit

From SB-Components Wiki

Motor Driver for Micro:Bit

Motor Driver for micro:bit is introduced as the latest edition of a range of SB Components that can interface with up to 2 DC motors and 3 pwm based Servo motors. It works on Motor Power supply: 6V~12V (VIN terminal) an output current of up to 3A with a powerful integrated TB6612FNG Module IC that scales up the performance. VIN terminal can be used for providing the power to the Motor driver for micro:bit.

Features

  • Connect up to 2 DC motor and 3 servo motor simultaneously.
  • TB6612FNG Motor driver IC.
  • Comes with development resources and material
  • Onboard standard servo headers
  • OOnboard multi connectors.

  • Specifications

  • Motor Power supply - 6V~12V (VIN terminal)
  • Servo motor voltage: 5V
  • OLogic voltage: 3.3V
  • Output current up to 3A
  • Microbit motor driver.png

    Pinout

    PIN Description
    Vcc Power (6~12V)
    GND Ground
    MA1 Positive Terminal of motor A
    MA2 Negative Terminal of motor A
    MB1 Positive Terminal of motor B
    MB2 Negative Terminal of motor B
    P0 Servo 1 Control Pin
    P1 Servo 2 Control Pin
    P2 Servo 3 Control Pin

    Programming

    Drag and Drop

    Many people want to learn the process to learn more about micro:bit by getting an understanding of the potential of micro:bit. If one wants to run servo motor and C motor with the micro:bit motor driver then they can do the following steps.

    A user needs to connect the PWM servo motor to the connector(3 pin header) of the servo driver board, labelled as P0, P1, and P2 to connect up to 3 servo motors. Take micro:bit and stack it on the motor driver board’s edge connector. Connect VIN and ground or the external power supply to the motor driver to provide power to it. A user needs to switch on the slider switch of the motor driver. See the example codes and drag and drop features on makecode Start a new project by clicking on create project A user needs to add an extension for SB motor driver via clicking on the tab(advanced) >> Extensions and enter the mentioned URL below. https://github.com/sbcshop/Micro-Bit-Motor-Driver

    micro:bit motor controller Click on search Now look for the search result to add the extension to the project(current). makecode micro:bit Control your servo motor by motor driver Extension feature. micro:bit DC motor controller

    Resources